Shower Seat Features - ADA Compliant
All shower seats are made in the USA by SEACHROME
| |
Wall Mount Folding Bench Seats
Seat top material options:
Phenolic material (offered in Almond, Teak or White)
2″ cushion (offered in Almond or White)
One-piece solid HDPE (White)
Seat top design:
3″ slats (phenolic material only) or one-piece solid with standard drain slots
Frame: constructed from #304 stainless steel
Yoke: #304 stainless steel (1″ diameter x 18 gauge, .048) with flanges (3″ diameter x 10 gauge, .135), welded to tubing (1″ round x 18 gauge, .048)
ADA compliance with Lift-Assist Technology. Easy to lift with less than 5 pounds of force.
Meets and exceeds the minimum 250 lb. load when properly installed.
| |
Wall Mount Transfer Seats
Seat top material options:
Phenolic material (offered in Almond, Teak or White)
2″ cushion (offered in Almond or White)
One-piece solid HDPE (White)
Seat top design:
3″ slats (phenolic material only) or one-piece solid with standard drain slots
Frame: constructed from #304 stainless steel
Yoke: #304 stainless steel (1″ diameter x 18 gauge, .048) with flanges (3″ diameter x 10 gauge, .135), welded to tubing (1″ round x 18 gauge, .048)
ADA compliance with Lift-Assist Technology. Easy to lift with less than 5 pounds of force.
Meets and exceeds the minimum 250 lb. load when properly installed.
Bench Seats with Swing Down Legs
Seat top material options:
Phenolic material (offered in Almond, Teak or White)
2″ cushion (offered in Almond or White)
One-piece solid HDPE (White)
Seat top design:
3″ slats (phenolic material only) or one-piece solid with standard drain slots
Frame: constructed from #304 stainless steel 1-1/4" square 18 gauge. Flanges (3″ diameter x 10 gauge, .135), welded to tubing (1″ round x 18 gauge, .048). Swing-down legs: #304 stainless steel, 1″ diameter x 18 gauge, .048, adjustable to 17-19″ height. Legs automatically lock in place when seat is raised up.
Supports up to 1,000 lbs. when properly installed
ADA compliance with Lift-Assist Technology. Easy to lift with less than 5 pounds of force.
| |
Transfer Seats with Swing Down Legs
Seat top material options:
Phenolic material (offered in Almond, Teak or White)
2″ cushion (offered in Almond or White)
One-piece solid HDPE (White)
Seat top design:
3″ slats (phenolic material only) or one-piece solid with standard drain slots
Frame: constructed from #304 stainless steel 1-1/4" square 18 gauge. Flanges (3″ diameter x 10 gauge, .135), welded to tubing (1″ round x 18 gauge, .048). Swing-down legs: #304 stainless steel, 1″ diameter x 18 gauge, .048, adjustable to 17-19″ height. Legs automatically lock in place when seat is raised up.
Supports up to 1,000 lbs. when properly installed
ADA compliance with Lift-Assist Technology. Easy to lift with less than 5 pounds of force.
Tub Seats
Seat top material options:
Phenolic material (offered in Almond, Teak or White)
2″ cushion (offered in Almond or White)
One-piece solid HDPE (White)
Seat top design: 3″ slats (phenolic material only)
Frame: constructed from #304 stainless 10 gauge. welded to tubing (1″ round x 18 gauge, .048).
Seat automatically held in place (when raised up) by friction hinge bracket
Meets and exceeds the minimum 250 lb. load when properly installed.
